ANALISIS PENGARUH KATALISATOR PADA PROSES PACK CARBURIZING TERHADAP KEKERASAN DAN STRUKTUR MIKRO BAJA ST37

Zainal Abidin, Priyagung Hartono, Unung Lesmanah

Abstract


Kata kunci: Pack Carburizing, Katalis CangkangKerrang, Media Pendingin.

Full Text:

PDF Remote

References


DAFTAR PUSTAKA

Achmadi, A., Widodo, T. D., & Irawan, Y. S. (2025). Influence of Lorjuk Mussel Shells and Peanut Shells As Carburizer Media in the Pack Carburizing Process of Aisi 1020. International Journal of Mechanical Engineering Technologies and Applications, 6(1), 34–47. https://doi.org/10.21776/mechta.2025.006.01.4

Adedipe, O., Sunday, V., Agbese, N., Lawal, A., Wahab, O., Oyeladun, A., & Baba, J. (2023). Explicit microstructural and electrochemical study of value-added carburized mild steel with coconut shell ash and CaCO 3 nanoparticles derived from periwinkle shell. Chemical Data Collections, 45(March), 101028. https://doi.org/10.1016/j.cdc.2023.101028

Asrofi, M., Hidayatulloh, M. A. V., Jatisukamto, G., Sutjahjono, H., & Sakura, R. R. (2020). The effect of temperature and volume fraction of mahoni (Swietenia mahogani) wood charcoal on SS400 steel using pack carburizing method: Study of hardness and microstructure characteristics. AIMS Materials Science, 7(3), 354–363. https://doi.org/10.3934/matersci.2020.3.354

Hidayat, T., Hartono, P., & Sujatmiko. (2016). Analisa Pengaruh Suhu Pada Media Pendingin Terhadap Sifat Mekanis (Kekerasan) Baja S45C Pada Proses Hardening. Jurnal Sains Dan Teknologi Teknik Mesin Unisma, 6(2), 31–35.

Pradani, Y. F., Sulaiman, M., & Hardiyanto, S. (2020). Analisis Tingkat Kekerasan Aluminium 6061 Berdasarkan Variasi Media Pendingin Pada Proses Pack Carburizing. Steam Engineering, 2(1), 1–10. https://doi.org/10.37304/jptm.v2i1.1663

Sigit Kristiadi, Unung Lesmanah, & Artono Raharjo. (2023). Pengaruh Variasi Media Pendingin Terhadap Kekerasan dan Mikrostruktur Pada Pengecoran Aluminium 6061. Ring Mechanical Engineering, 2(2), 101–112. https://doi.org/10.33474/rm.v2i2.19906

Asrofi, M., Hidayatulloh, M. A. V., Jatisukamto, G., Sutjahjono, H., & Sakura, R. R. (2020). The effect of temperature and volume fraction of mahoni (Swietenia mahogani) wood charcoal on SS400 steel using pack carburizing method: Study of hardness and microstructure characteristics. AIMS Materials Science, 7(3), 354–363. https://doi.org/10.3934/matersci.2020.3.354

Callister Jr, W. D., & Rethwisch, D. G. (2018). Characteristics, Application, and Processing of Polymers. In Materials Science and Engineering - An Introduction.

George E. Totten. (2007). Steel Heat Treatment : Metallurgy and Technologies. In Steel Heat Treatment : Metallurgy and Technologies (pp. 695–735).

Kimia, P., & Muzakir, A. (n.d.). Karakterisasi Material ; Rifan Hardian.

Lesmanah, U., Marsyahyo, E., & Vitasari, P. (2013). OPTIMASI SIFAT MEKANIS KEKUATAN TARIK BAJA ST 50 DENGAN PERLAKUAN GAS CARBURIZING VARIASI HOLDING TIME UNTUK PENINGKATAN MUTU BAJA. 4(2), 366–375.

Mazuli, S., & Haripriadi, B. D. (2020). Analisa Pengaruh Arang Kayu Bakau, Arang Tempurung Kelapa Dan Arang Kayu Leban Pada Proses Pack carburizing Terhadap Kekerasan Baja Karbon St 37. Jurnal Rekayasa Material, Manufaktur Dan Energi, 3(2), 128–137. https://doi.org/10.30596/rmme.v3i2.5275

Parrish, G. (1999). Carburizing:Microstructures and Properties. In ASTM INternational. http://link.springer.com/10.1007/BF02646170

Srivastava, A., Kumar, H., Khan Yusufzai, M. Z., & Vashista, M. (2019). Microstructural characterization of pack carburized is-2062 low carbon steel using magnetic barkhausen noise. Materials Today: Proceedings, 16, 439–443. https://doi.org/10.1016/j.matpr.2019.05.112

Sundari, E., Taufikurrahman, & Fahlevi, R. (2018). Analisa Pengaruh Pack carburizing Terhadap Sifat Mekanis Sprocket Imitasi Sepeda Motor Menggunakan Arang Kayu Gelam Dan Serbuk Cangkang Remis Sebagai Katalisator. Jurnal Austenit, 10(2), 72–77.

Umurani, K., Fathi, S., & Tanjung, I. (2021). Pengaruh Penambahan Serbuk Arang Cangkang Kemiri – Barium Karbonat Terhadap Permukaan Pahat Bubut Dengan Menggunakan Metode Pack carburizing. VOCATECH: Vocational Education and Technology Journal, 2(2), 114–121. https://doi.org/10.38038/vocatech.v2i2.61

Wijaya, H., & Junaidi, L. (2013). Karakterisasi dan Uji Efektivitas Arang Kulit kacang sebagai Filter Asap Rokok. Jurnal Dinamika Penelitian Industri, 24(2), 74–81. https://www.neliti.com/publications/79074/karakterisasi-dan-uji-efektivitas-arang-kulit kacang-sebagai-filter-asap-rokok.

Adedipe, O., Aigbodion, V. S., Agbo, N. A., Lawal, S. A., Oyeladun, O. W. A., Mokwa, J. B., & Dauda, E. T. (2023). Unveiling high-performance carburized mild steel using coconut shell ash and CaCO3 nanoparticles derived from periwinkle shell. International Journal of Advanced Manufacturing Technology, 126(9–10), 4711–4721. https://doi.org/10.1007/s00170-023-11399-w

Adedipe, O., Sunday, V., Agbese, N., Lawal, A., Wahab, O., Oyeladun, A., & Baba, J. (2023). Explicit microstructural and electrochemical study of value-added carburized mild steel with coconut shell ash and CaCO 3 nanoparticles derived from periwinkle shell. Chemical Data Collections, 45(March), 101028. https://doi.org/10.1016/j.cdc.2023.101028

Callister Jr, W. D., & Rethwisch, D. G. (2018). Characteristics, Application, and Processing of Polymers. In Materials Science and Engineering - An Introduction.

Darmo, S., Soenoko, R., Siswanto, E., & Widodo, T. D. (2018). Study on mechanical properties of pack carburizing SS400 steel with energizer pomacea canalikulata lamarck shell powder. International Journal of Mechanical Engineering and Technology, 9(5), 14–23. https://doi.org/10.30574/gjeta.2022.11.2.0087

Dwi Susanto, T., Rekto Prabowo, N., & Darmawan, B. (2020). Intuisi Teknik dan Seni Efektifitas Katalis Proses Pack carburizing Terhadap Kekerasan Permukaan dan Struktur Mikro Baja ST 42 The Effectiveness of Pack carburizing Catalyst Against Surface Hardness and Microstructure of ST 42. 12(2), 29–39.

Hafni, H., Hadi, S., & Edison, E. (2017). The Influence of Calcium Carbonate Composition and Activated Carbon in Pack carburizing Low Carbon Steel Process in the Review of Hardness and Micro Structure. IOP Conference Series: Earth and Environmental Science, 97(1). https://doi.org/10.1088/1755-1315/97/1/012037

Hassan, K. S. (2015). Comparative of wear resistance of low carbon steel pack carburizing using different media. International Journal of Engineering & Technology, 4(1), 71. https://doi.org/10.14419/ijet.v4i1.3866

Karim, A., Azmy, I., Khoiriah, S. Q., & Bintoro, C. (2022). Microstructure and Mechanical Properties of Pack Carburized AISI 1020 Steel Using Na2CO3 and CaCO3 Catalysts. Journal of Renewable Energy and Mechanics, 5(02), 52–59. https://doi.org/10.25299/rem.2022.vol5(02).9965

Mazuli, S., & Haripriadi, B. D. (2020). Analisa Pengaruh Arang Kayu Bakau, Arang Tempurung Kelapa Dan Arang Kayu Leban Pada Proses Pack carburizing Terhadap Kekerasan Baja Karbon St 37. Jurnal Rekayasa Material, Manufaktur Dan Energi, 3(2), 128–137. https://doi.org/10.30596/rmme.v3i2.5275

Oreko, B. U., Otanocha, O. B., & Idi, S. (2020). Experimental investigation of the effect of pack carburization on impact strength and hardness property of ASTM A516/516M-05 steel plate weldment. International Journal of Integrated Engineering, 12(1), 115–121.

Shell, N., Powders, W., & Duration, C. (2022). Effective Case Depth and Wear Resistance of Pack Carburized.

Umunakwe, R., Okoye, O. C., Madueke, C. I., & Komolafe, D. O. (2017). Effects of Carburization with Palm Kernel Shell/Coconut Shell Mixture on the Tensile Properties and Case Hardness of Low Carbon Steel. FUOYE Journal of Engineering and Technology, 2(1). https://doi.org/10.46792/fuoyejet.v2i


Refbacks

  • There are currently no refbacks.